|
March Monthly Specials:
Click here for flyer in PDF format (1 mb).
Requires Adobe's FREE Acrobat Reader (click here).
|
|
|
#334-800 Installed
(click on picture for a larger view)
|
#334-801 Installed
(click on picture for a larger view)
|
A Great Winch at a Great Price! Buy a 8000LB or 9500LB Bulldog Winch Get a 20,000LB 20 foot 2 inch Tow Strap FREE
Get this tow, strap a $45 value, free with your purchase.
FREE tow strap with purchase of one of our new BULLDOG Winchs. These will be dropped shipped direct from the factory. Standard Freight charges will be added to the total cost on your invoice.
|
|
|
 |
 |
 |
 |
Aftermarket Bumper Extensions |
 |
 |
 |
 |
SOR has secured a source for new 40 Series bumper extensions that mount to the outside of the front frame rails. These extensions are used to add strength to the front bumper assembly. They are direct replacements on 8/80 to 1984 FJ/BJ 40, 45 and 47 Land Cruisers but can be used on earlier, 1958 to 1980 Cruisers by drilling one additional hole in each frame rail.
RETROFIT FOR EARLY 40 SERIES LAND CRUISERS |
|
Owners of pre 8/80 40 Series Cruisers can use these
by drilling an additional hole in each frame rail to accommodate the shorter extension.
|
 |
 |
Early (longer) to later
model (shorter) comparison | Drill a hole in the frame
for the lower rear fastener |
|
|
 |
 |
 |
 |
Heater Blower Restore Kit |
 |
 |
 |
 |
|
|
|
#330-423 Installed
(click on picture for a larger view)
|
|
|
|
#229-500P Installed
(click on picture for a larger view)
|
#229-503HT Installed
(click on picture for a larger view)
|
The Big Tube Bar for the Land Cruiser is the result of ECB’s commitment to the excellence in product engineering and performance. Tested and certified to comply with the 100 Series SRS air bags and crumple zones, this Big Tube Bar is carefully designed to complement the Land Cruiser’s bold new styling. Made exclusively from high tensile materials, the full featured Big Tube Bar will also accommodate an electric recovery winch when fitted with the optional remote mounted winch frame kit (order separately). The recovery winch housing conceals the complete winching system within the bar’s original dimensions. This provides a unique new system with tamper proof security, while ensuring there is no unnecessary forward protruding components. Styled to please and engineered to perform. Big Tube Bars mount directly to the vehicle's frame with individually designed brackets for a perfect first time fit. All of the Bullbar hardware is optimum quality 'High Tensile' bolts where required.
Weight = 74 lbs, must be shipped by truck
For more information on East Coast Bullbars and other bull bars we stock see page 229.
Certain already discounted items may not qualify.
|
|
|
 |
Winch Mounting Kits |
 |
Winch mounting kits are available to fit low profile winches such as Warn M8000, Ramsey Rep8000, Ramsey Rep9000 but will not fit Warn XD9000, see pages 333 and 334.
|
|
|
#052-50 Installed
(click on picture for a larger view)
|
#052-50 Installed
(click on picture for a larger view)
|
#052-50 Installed
(click on picture for a larger view)
|
If you are having a problem with those cold weather starts, then Specter Off-Road has the solution, a block heater! Designed to replace one of the side freeze plugs, this Block Heater plugs into a standard 110 volt outlet to give you quick starting even in the coldest climates.
|
|
|
SOR is now producing our own line of Dash Covers. By producing these ourselves we have more control over quality and workmanship. Contour fit to enhance the look of your Cruiser.. Protect your factory dash from the sun's damaging ultra violet rays. These dash covers are made of plush lined velour material. Each pattern has been tailored fit with openings for all vents, and air ducts; matching binding for a perfect bound finished edge, designed to work with air bag equipped models and available in a selection of colors to match your interior. See the following listings for left hand drive vehicles and the listings on page 346 for right hand drive non USA vehicles.
|
|
 |
 |
 |
 |
SOR Pet Pads for 60, 80 & 100 Series Bench Seat |
 |
 |
 |
 |
Want to give your seats that extra layer of protection? SOR has the solution. This Pet Pad is designed to fit your Land Cruiser’s rear passenger seat bottom, fits over your factory cloth or leather upholstery. If you have pets and kids that shed and spill, this is the ideal product for you. Easy on and off for passengers that want a clean seat to sit on. Made of durable Tuff Duck vinyl lined fabric. Tailored stitching, perfect trimmed sewn binding, and cut outs for those models with seat belt pockets. Available in Grey, Brown, Tan and Woodland Camo Tuff Duck. Great Combo for those with SOR Slip Covers.
|
|
|
|
Tailored Cut-outs (click for large picture)
|
Non-slip Foam Backing (click for large picture)
|
Perfect Trimmed Sewn Binding (click for large picture)
|
|
(click for large picture)
|
(click for large picture)
|
(click for large picture)
|
(click for large picture)
|
(click for large picture)
|
(click for large picture)
|
(click for large picture)
|
(click for large picture)
|
(click for large picture)
|
(click for large picture)
|
|
Different combinations of the following colors are available for each vehicle.
|
(Brown Tuff Duck Click for large picture)
|
(Grey Tuff Duck Click for large picture)
|
(Woodland Camo Tuff Duck Click for large picture)
|
(Tan Camo Tuff Duck Click for large picture)
|
|
60 Series
|
|
80 Series
|
|
100 Series
|
|
|
(click for large picture)
|
(click for large picture)
|
New Denim Tire Cover is manufactured with 18 oz. Denim lined Haartz material and high strength T-135 marine grade thread. The Denim Tire Cover is available to match your Specter softop, bikini top or half doors. See page 270, 272 and 273.
|
Fits 29 X 9 inch Tire Size
|
|
Fits 30 X 10 inch Tire Size
|
|
Fits 31 X 11 inch Tire Size
|
|
|
 |
Use arrows to browse catalog |
 |
| |